Simple Info About How To Clean A Psp Laser

Locate the lens on the disc drive.

How to clean a psp laser. The only way i clean lasers is with a swab and some alcohol, and only when it needs to be done. Using a clean cotton bud, dip it in the isopropanol and gently wipe the. Use a tissue or soft cloth to wipe any dust and crumbs off the psp surface.

Spray a tiny amount of lens cleaner onto the psp screen ( figure 3.1 ). Take a new cotton swab and soak it in pure and distilled vinegar. If you don't have an issue a simple cleaning the laser with some isopropyl alcohol 90% is best with cotton swabs can be good preventive measures as well as greasing the lasers.

Sometimes it needs to be cleaned, but then you need to remove the laser (see instructions further down). Can't imagine even if you bought your system at launch it needing to have the lens cleaned. Use the following procedure to clean psp's:

As for me i've always cleaned the lens just by breathing on it and using a cotton swab or slightly moisten the end of the cotton swab with water and gently cleaning the lens. Using a little pressure, clean both sides of the lens. If you've made it this far and everything checks out, the only other thing you can do without disassembling the console is to very gently clean the optics at the laser pickup.

Now is also a suitable time to clean the rest of your console, by. Can i use a cotton swab as a match? Dust can get on the lens and scratch it while you are cleaning.